Table of Contents
Advertisement
Multi-Projection Function
c
Use the [
][
][ ][ ] buttons to select a boundary line of the
area you want to adjust.
The selected line is displayed in orange.
d
Press the [
] button to confirm the selection.
e
Use the [
][
][ ][ ] buttons to adjust the boundary line
positions, and then press the [
f
Press the [
][
][ ][ ] buttons to select the point you want to
move, and then press the [
The selected point is displayed in orange.
] button.
] button.
g
Press the [
][
][ ][ ] buttons to move the point.
To continue to move another point, press the [Esc] button to return
to step 6, and then repeat steps 6 and 7.
To adjust another boundary line, press the [Esc] button until the
screen for selecting a boundary line from step 3 is displayed.
a
To return Black Level to its default value, press the [Esc]
button to return to the screen from step 1, select [Reset], and
then press the [
h
To complete the adjustment, press the [Menu] button.
Screen Matching
Adjust the tint and brightness for multiple projectors.
When projectors are connected to a network, the tint and brightness for
multiple projectors are automatically adjusted based on the darkest
projector.
When projectors are not connected to a network, or if auto adjustment
does not work, you can adjust the tint and brightness for all projectors
manually.
] button.
93
Advertisement
Table of Contents
