Table of Contents
Advertisement
Turning On the Projector
• Turn on the connected computer or video equipment.
• When using a laptop computer, change the screen output of the
computer.
• Insert media such as a DVD and play it back.
• Press the [Search] button on the remote control to detect the input
source.
• Press the button for the input source that you want to project by using
the remote control.
Warning
• Do not look into the projector's lens during projection. Doing so may
damage your eyes. Be especially careful if children are present.
• During projection, do not block the light from the projector with a book and
so on. If the light from the projector is blocked for a long time, the area on
which the light shines becomes hot which could cause it to melt, burn, or
start a fire. Also, the lens may get hot due to the reflected light which could
cause the projector to malfunction. To stop projection, use the Shutter
function, or turn off the projector.
a
• If Direct Power On is set to On in the Extended menu, the
projector automatically turns on when power is supplied to it. When
the power cord is plugged in, note that the projector turns on
automatically in cases such as recovery from a power outage.
s Extended - Operation - Direct Power On
• You can set the shutter status when the projector is turned on in
Shutter Settings from the Extended menu.
s Extended - Operation - Shutter Settings - Startup
p.142
p.142
57
Advertisement
Table of Contents
