Remote Control - Epson EB-L20002U User Manual

Part Names and Functions

Remote Control

Name
A
Starts projection when the main power switch is on and
[ ] button
the projector is in standby mode.
B
Places the projector in standby mode when the main
[t] button
power switch is on and it is projecting.
C
Changes to images from each input port.
Change input buttons
s "Changing the Projected Image"
D
Select any frequently used item from the Configuration
[User1] button
menu items, and assign it to any of these buttons. By
[User2] button
pressing the button, the assigned menu item selection/
[User3] button
adjustment screen is displayed, allowing you to make one-
touch settings/adjustments.
s "Settings Menu"
E
Each time the button is pressed, the aspect mode changes.
[Aspect] button
s "Changing the Aspect Ratio of the Projected Image"
p.77
F
If pressed while projecting analog RGB signals from the
[Auto] button
Computer In port or the BNC In port, you can
automatically optimize Tracking, Sync., and Position.
G
[Freeze] button Images are paused or unpaused.
s "Freezing the Image (Freeze)"
H
[Default] button Enabled when [Default]: Reset is displayed on the
configuration menu guide. The settings being adjusted are
returned to their default values.
s "Configuration Menu Operations"
I
[Menu] button Displays and closes the Configuration menu.
s "Configuration Menu Operations"
• Press to adjust focus, zoom, distortion, and lens shift.
J
[ ][ ][ ][ ]
• When the Configuration menu or the Help screen is
buttons
displayed, pressing these buttons selects menu items
and setting values.
s "Configuration Menu Operations"
24
Function
p.59
p.140
p.102
p.131
p.131
p.131