Image Maintenance; Color Calibration - Epson EB-L20002U User Manual

Hide thumbs Also See for EB-L20002U:
Table of Contents

Advertisement

Image Maintenance

Color Calibration

Automatically adjusts aging deterioration of the color tone for the whole
screen based on the default color settings.
Operating conditions for auto adjustment functions
The auto adjustment function for Color Calibration works under the
following conditions:
• The screen surface is flat and not skewed or warped
• Using a matte white diffusion screen
• The projection size is 100 to 300 inches
• The projector is setup parallel to the projection surface
a
• Auto adjustment is not available when using the following lenses.
ELPLX02, ELPLX02W, ELPLL08
• For some lenses, auto adjustment may not work even within the
movement range when the amount of lens shift is too large.
s "Adjusting the Position of the Projected Image (Lens Shift
Adjustment)"
p.37
• We recommend performing Color Calibration at least 30 minutes
after turning on the projector or canceling the shutter function.
• To increase the accuracy of adjustments, we recommend darkening
the room while projecting images and then making adjustments.
• Auto adjustment is performed using the camera built into the front
of the projector. Do not block the camera or the projected images.
• Auto adjustment takes approximately one minute and 30 seconds.
• After making automatic adjustments, Color Uniformity and Color
Matching are returned to their defaults.
• By using the scheduling function, you can automatically adjust the
color for the whole screen at the time you set.
s "Scheduling Function"
• See the following if Color Calibration does not work correctly.
s "Automatic adjustments are not performed correctly"
p.106
p.193
a
Press the [Menu] button while projecting.
b
Select Color Calibration from Extended.
c
Select Start Auto Adjustment, and then press the [
The adjustment pattern is displayed, and adjustment starts. If the
projected image is displayed before the adjusting, the procedure is
complete.
a
• See the following if an error occurs.
s "Automatic adjustments are not performed correctly"
p.193
• To return to the status before auto adjustment, select Undo.
When you select Redo after selecting Undo, it returns the
image to the status after auto adjustment.
• To return Color Calibration adjustment value to its default
value, select Reset.
208
] button.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb-l20000u

Table of Contents