Part Names And Functions; Front/Top - Epson EB-L20002U User Manual

Part Names and Functions

Unless otherwise mentioned, the illustrations used in this guide show the
projector with the lens unit (ELPLM15) installed.

Front/Top

Name
A
Install this when storing or transporting the projector.
Protective cap
B
Built-in camera This camera scans the image when correcting the
projected image automatically.
Function
Attention
Exposing the camera to bright light may
cause a malfunction to occur.
Name
C
Projection lens Images are projected through here.
D
Lens replacement Remove when attaching or removing the lens.
cover
s "Removing and Attaching the Projector Lens Unit"
p.30
E
Takes in air to cool the projector internally. Be sure to
Air intake vent
clean the air filter regularly.
(air filter)
s "Cleaning the Air Filter and Air Intake Vent"
s "Replacing the Air Filter"
F
Receives signals from the remote control.
Remote receiver
G
The color of the indicators and whether they are flashing
Status indicators
or lit indicate the status of the projector.
s "Reading the Indicators"
Function
Warning
This section emits laser light. Do not look into the
lens while projecting. This could cause damage to
eyesight due to the powerful light emitted.
Caution
When shifting the lens, do not put your hands near
the lens unit. Your fingers may get caught between
the lens unit and the projector, and cause an in‐
jury.
Caution
When moving the projector, do not hold the lens
replacement cover. The lens replacement cover
may be removed and the projector may fall, which
could cause an injury.
p.206
p.169
17
p.202