Rear/Side - Epson EB-L20002U User Manual

Part Names and Functions
Name
H
Lens replacement Remove when installing the lens unit (ELPLX02/
cover (for ELPLX02/ ELPLX02W).
ELPLX02W)
I
You can attach a commercially available eye bolt when
Screw holes for eye
temporarily transporting the projector.
bolts

Rear/Side

Name
A
Remote receiver Receives signals from the remote control.
B
Air exhaust vent Exhaust vent for air used to cool the projector internally.
Function
Function
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the air exhaust vent. Hot air from the air exhaust
vent could cause burns, warping, or accidents to
occur.
Name
C
Air intake vent Takes in air to cool the projector internally. Be sure to
clean the air intake vent regularly.
s "Cleaning the Air Filter and Air Intake Vent"
D
s "Control Panel"
Control panel
E
Supplies power to the projector.
Main power switch
F
Connects the power cord to the projector.
Power inlet
G
Attach this to the power cord to prevent the cord from
Cable holder
falling out.
H
Attach this to the built-in camera so that lasers from other
Built-in camera
equipment do not enter the built-in camera when using
protection plate
the projector with other devices that emit laser beams.
I
Security slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
See the following for more details on the Microsaver
Security System.
http://www.kensington.com/
J
s "Connector Ports"
Interface
18
Function
p.202
p.22
p.19