Operating A Projector From Your Computer - Epson EB-L20002U User Manual

Monitoring and Controlling
• Monitoring and control with application software
You can use Crestron RoomView
®
by Crestron to monitor devices in the system, to communicate with the
help desk, and to send emergency messages.
This manual describes how to perform operations on your computer using
a Web browser.
a
• You can only enter single-byte alphanumeric characters and symbols.
• The Message Broadcasting feature for Epson Projector Management
is unavailable while using Crestron Connected
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s Extended - Standby Mode

Operating a projector from your computer

Displaying the operation window
Check the following before carrying out any operations.
• Make sure the computer and projector are connected to the network.
• Set Crestron Connected to On from the Network menu.
Network - Others - Crestron Connected
s
a
Start the Web browser on the computer.
b
Enter the IP address of the projector in the address field of the
Web browser, and press the Enter key on the keyboard.
The Epson Web Control home screen is displayed.
® ®
Express/Crestron Fusion provided
®
.
p.142
p.155
c
Press Crestron Connected.
The operation window is displayed.
226