EPSON PowerLite EB-L250F, EB-L255F - Projector Quick Setup
![]()
Connect the projector
Computer
Choose from the following connections.
![EPSON - PowerLite EB-L250F - Connect the projector - Connection diagram Connect the projector - Connection diagram]()
HDMI port
Connect one end of an HDMI cable to one of the projector's HDMI ports and the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to the projector's Computer1 port, and the other end to your computer's
monitor port. If you are using a laptop, switch it to external display. You can also connect an audio cable.
Note: To use the projector's Computer2 port, you need to change the Monitor Out Port setting in the Signal I/O menu.
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer.
Windows® 7 or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only on first connection). If the software screen does not display automatically, open My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.8.x or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). If the software screen does not display automatically, double-click EPSON_PJ_UD, then double-click USB Display Installer.
External monitor and speakers
You can connect an external monitor and external speakers to your projector to enhance your presentations.
Wired network
Connect the projector to your network using an Ethernet cable.
![EPSON - PowerLite EB-L250F - Wired network - Ethernet cable connection diagram Wired network - Ethernet cable connection diagram]()
Video device
Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them.
![EPSON - PowerLite EB-L250F - Video device - Connection Diagram Video device - Connection Diagram]()
Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector's USB-A (flat) port.
![EPSON - PowerLite EB-L250F - Camera, USB device, or document camera - Usb cable connection Camera, USB device, or document camera - Usb cable connection]()
If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's PC Free feature. You can also connect other Epson document cameras to the projector.
Using the remote control
Install the two AA batteries as shown.
![EPSON - PowerLite EB-L250F - Using the remote control - Installing battaries and Controls description Using the remote control - Installing battaries and Controls description]()
Turn on your equipment
- Turn on your computer or video source.
- Make sure the power cord is connected and plugged into an electrical outlet.
![EPSON - PowerLite EB-L250F - Turn on your equipment - Step 1 - Connect the power cord Turn on your equipment - Step 1 - Connect the power cord]()
- Open the projector's lens cover.
![EPSON - PowerLite EB-L250F - Turn on your equipment - Step 2 - Open projector`s lens cover Turn on your equipment - Step 2 - Open projector`s lens cover]()
- Press the
power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the
power button twice. - Follow the on-screen instructions to set up your projector. If you see a screen displaying 123, press
on the remote control to continue. - If you don't see an image, do one of the following:
- Press the Source Search button on the remote control to select the image source.
- Press the Home button on the remote control. Use the arrow buttons to highlight any of the options on the Home screen, then press
to select it.
Note: If you still see a blank screen or have other display problems, see the troubleshooting tips.
- The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Management and press
. Select Language and press
. Select your language and press
. Press the Menu button to exit the menu system.
Adjust the image
- To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position.
![EPSON - PowerLite EB-L250F - Adjust the image - Raising the image Adjust the image - Raising the image]()
- To reduce or enlarge the image, rotate the zoom ring on the projector.
![EPSON - PowerLite EB-L250F - Adjust the image - Reducing the image Adjust the image - Reducing the image]()
- To sharpen the image, turn the focus ring on the projector.
![EPSON - PowerLite EB-L250F - Adjust the image - Sharpening the image Adjust the image - Sharpening the image]()
- If your image looks like
or
, you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal keystone slider on the projector to correct the image shape.
![EPSON - PowerLite EB-L250F - Adjust the image - Correcting the image shape Adjust the image - Correcting the image shape]()
Wireless network configuration
Follow these steps to set up the projector for a wireless network connection.
- Press the Menu button on the remote control.
- Select the Management menu and press
![]()
![EPSON - PowerLite EB-L250F - Wireless network configuration - Management menu Wireless network configuration - Management menu]()
- Select On as the Wireless LAN Power setting.
- Select the Network menu and press
. - Select Network Settings and press
![]()
- Select Wireless LAN as the Priority Control Interface setting.
- Select one of the following as the Simple AP setting:
- On for a direct connection to a computer, tablet, or smartphone.
- Off to connect your projector to a router or access point.
Note: If you connect to the projector directly, you can only project locally stored content.
- Select any other wireless settings as necessary.
- When you are finished, return to the Network Settings menu and select Set to apply your settings.
Wired network configuration
Follow these steps to set up your projector for a wired network connection.
- Press the Menu button on the remote control, select the Network menu, then press
. - Choose Network Settings and press
. - Select Wired LAN as the Priority Control Interface setting.
- Select the Wired LAN menu and press
![]()
![EPSON - PowerLite EB-L250F - Wired network configuration - Wired LAN menu Wired network configuration - Wired LAN menu]()
- Choose IP Settings and press
![]()
- If your network assigns addresses automatically, make sure the DHCP setting is on. If not, make sure DHCP is off and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. Then press Esc.
- To prevent the IP address from appearing on the network standby screen, set the IP Address Display setting to Off.
- When you are finished, return to the Network Settings menu and select Set to apply your settings.
- Press the Menu button to exit the menu system.
Install the optional software
Download the Epson iProjection™ software and operation guide from your product's support page and install the program on each computer that will project over the network.
To monitor and control your projector over the network, download and install the Epson Projector Management software (Windows only) and operation guide from your product's support page.
Project over a network
- Press the LAN button on the remote control. You see this screen:
![]()
- Start Epson iProjection on your computer.Windows 10: Select
> EPSON Projector > Epson iProjection VerX.XX.
Windows 8.x: Navigate to the Apps screen and select Epson iProjection Ver. X.XX.
Windows 7: Select
or Start > Programs or All Programs > EPSON Projector > Epson iProjection > Epson iProjection Ver X.XX.
macOS: Double-click the Epson iProjection icon in the Applications folder.
- Select Advanced Connection Mode and click OK.
![EPSON - PowerLite EB-L250F - Project over a network - Advanced connection mode Project over a network - Advanced connection mode]()
- Select the projector you want to connect to, then click Join.
If you don't see the projector you want, click the Automatic search button to find the projector automatically, click the Manual search button to enter the projector's IP address, or click the Profile button to find the projector based on a previously saved profile. - If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK.
Your computer image is projected, with a floating toolbar:
![EPSON - PowerLite EB-L250F - Project over a network - Floating toolbar Project over a network - Floating toolbar]()
When you're done presenting, click Disconnect All on the toolbar.
Using the Epson iProjection app
You can project wirelessly from a mobile device (iOS, Android™, or Chromebook™) using the Epson iProjection app and a QR code.
- Scan the following QR code to download and install the Epson iProjection app.
![]()
- If you connected the projector to a network wirelessly, make sure to connect your mobile device to the same network.
- Press the LAN button on the remote control to display a QR code on the projector screen.
- Start Epson iProjection on your mobile device.
- Use the QR code reader feature to read the QR code displayed.
- Follow the app instructions to connect your device to the projector.
For more information on setting up and using this app, visit www.epson.com/projectorapp (U.S.), www.epson.ca/projectorapp (Canada), or www.latin.epson.com/iprojection (Caribbean).
Using web remote
You can use a standard web browser to control the projector through the network. A virtual remote control on your computer screen lets you perform many of the same functions as you can with the physical remote control.
- Open your web browser and enter the IP address of the projector you want to monitor in the browser's address bar.
If you're not sure what the IP address of the projector is, turn the projector on and select Wired LAN Info or Wireless LAN Info from the Network menu to display the IP address of the projector. (Do not enter the leading zeroes.) - Enter EPSONWEB as the default user name and admin as the default password, then click OK. The Epson Web Control menu opens.
- Select Basic Control. If you see a login screen, enter EPSONREMOTE as the user name and guest as the password.
- Use the on-screen buttons to operate the projector, as you would using the remote control.
![EPSON - PowerLite EB-L250F - Using web remote - Web remote controls Using web remote - Web remote controls]()
Managing content
You can manage content from your computer using the Epson Projector Content Manager software, or over the network using a web browser (Epson Web Control) or the Epson iProjection app.
Using the Content Manager software
The Epson Projector Content Manager software allows you to add images and movies to playlists and load them easily and directly to your projector via USB for playback.
Note: Download and install the Epson Projector Content Manager software from your product's support page.
Troubleshooting
If you see a blank screen or the No signal message after turning on your computer or video device, check the following:
- Make sure the Status light on the projector is blue and not flashing.
- Press the Source Search button on the projector or the remote control to switch to the correct image source, if necessary.
- Press the Home button on the projector or remote control to verify the source input and settings.
- If you're using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as
. You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate. - If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
- Make sure A/V Mute is not enabled. Press the A/V Mute button on the remote control and make sure the projector's lens cover is all the way open.
Registration
Register today to get product updates and exclusive offers. You can register online at www.epson.com/webreg.
Where to get help
Internet support services
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.
Telephone support
To use the Epson PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Optional accessories
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian sales).
EPSON and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Android and Chromebook are trademarks of Google LLC.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2020 Epson America, Inc., 8/20
![]()
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download EPSON PowerLite EB-L250F, EB-L255F - Projector Quick Setup
Need Assistance?
Do you have a question about the PowerLite EB-L250F that isn't answered in the manual? Leave your question here.