Table of Contents
Advertisement
List of Functions
"Setting Password Protection"
s
Submenu
Set this to Wireless LAN On when connecting the projector and
Wireless Mode
a computer via a wireless LAN. If you do not want to connect via
wireless LAN, turn it Off to prevent unauthorized access by
others.
p.110
Function
Submenu
Net. Info. - Wire-
Displays the following network setting status information.
• Connection Mode
less LAN
• Wireless LAN system
• Antenna Level
• Projector Name
• SSID
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• Region Code
When IPv6 is selected, the following information is displayed.
• IPv6 Address (Manual):
IPv6 Address, Prefix Length, Gateway Address
• IPv6 Address (Auto):
Temporary Address, Link-local Address, Stateless Address,
Stateful Address
Net. Info. - Wired
Displays the following network setting status information.
• Projector Name
LAN
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• IPv6 Address (Manual):
IPv6 Address, Prefix Length, Gateway Address
• IPv6 Address (Auto):
Temporary Address, Link-local Address, Stateless Address,
Stateful Address
When connecting iOS or Android devices using Epson
Display the QR
iProjection, read the QR code displayed.
Code
147
Function
Advertisement
Table of Contents
