Table of Contents
Advertisement
Multi-Projection Function
Tiling
When using multiple projectors to create one large image, assign a
projection position to each projector.
a
Before performing tiling, adjust the projected image so that it is a
rectangle. Also, adjust the size and focus of the images.
s "Adjusting the Image Size"
s "Correcting the Focus"
Performing tiling automatically
Automatically sets the arrangement for the projectors being used. You can
make settings by operating only the master projector.
a
Location setup is performed using the camera built into the front of
the projector. Do not block the camera or the projected images.
a
Press the [Menu] button while projecting.
b
Select Multi-Projection from Extended, and then press the [
button.
p.39
p.40
c
Select Projector Grouping, and then press the [
d
Select the projectors that will be used for tiling, and then press the
[
] button.
(1)
Select the projectors you want to use to enter a checkmark.
Select Refresh to update the list. Select Sort to sort the projector order.
(2)
Select Set, and then press the [
e
Select Tiling, and then press the [
f
Select Tiling. Select Auto, and then press the [Esc] button.
]
87
] button.
] button.
] button.
Advertisement
Table of Contents
