Multi-Projection Function
You can run Tiling Assist from Epson Projector Professional Tool (version
1.20 or later). Download the software from the following Web site.
http://www.epson.com
Operating conditions for auto adjustment functions
Tiling Assist works under the following conditions:
• The screen surface is flat and not skewed or warped
• Using a matte white diffusion screen
• The projection size is 100 to 300 inches
• The projected image after tiling is rectangular
• Parts of all projected images are overlapping
• The projector is setup parallel to the projection surface
• The blend width for edge blending is 15 to 43%
• All projectors have the same model number
a
• We recommend performing Tiling Assist at least 30 minutes after
turning on the projector or canceling the shutter function.
• To increase the accuracy of adjustments, we recommend darkening
the room while projecting images and then making adjustments.
• Auto adjustment is not available when using the following lenses.
ELPLX02, ELPLX02W, ELPLU03S, ELPLU04, ELPLL08
• Check the following before starting auto adjustment.
- The projector is connected to the network
- The projector has been configured in Epson Projector Professional
Tool
• Auto adjustment is performed using the camera built into the front
of the projector. Do not block the camera or the projected images.
• The time necessary for auto adjustment varies according to the
location and number of projectors and can take up to approximately
6 minutes.
• The settings for Point Correction and Black Level are corrected
automatically.
98