Table of Contents
Advertisement
Safety Warning and Cautions
Warning
• Do not open the projector's case. The projector contains a high-powered
laser.
• Possibly hazardous optical radiation emitted from this product. Do not look
at operating light source. Eye injury may result.
Caution
• This projector is a Class 1 laser product that complies with the IEC60825-1
international standard for lasers.
• Do not disassemble the projector when disposing of it. Dispose according to
your local or national laws and regulations.
Notes on Transporting
There are many glass parts and precision components inside the projector.
To prevent damage due to impacts when transporting, handle the projector
as follows.
Caution
The projector should not be carried by one person. At least three people are
needed to unpack or carry the projector.
Attention
• Moving Nearby
- Turn off the power to the projector and disconnect all cables.
- Attach the cover to the lens.
• When Transporting
After checking the points in "Moving Nearby", prepare the following and then
pack up the projector.
- Remove the lens unit if a lens is installed. Make sure you attach the
protective cap that was on the lens mount when you purchased the
projector.
- Enclose the projector securely in packaging material to protect it from
shock, and place it into a strong container. Be sure to notify the carrier
company that it is precision equipment and that it needs to be kept
horizontally during transportation.
10
Advertisement
Table of Contents
