Table of Contents
Advertisement
81.
To reduce possible water from penetrating into the window cavity,
caulk gap on both sides of window opening prior to installing the
4AI - Large Window Inserts. Position insert in cavity and secure with
8 - 1 1/4" Screws. Make sure to screw insert into the thick butt of the
siding only.
82.
Once Insert is attached, caulk the "triangular gap" between the Insert's outside flange and the siding.
Also put a bead of caulking horizontally at top of window where the flange and siding meet.This additional
caulking will also will reduce the chances of moisture entering into your shed.
83.
Insert second large window insert and attach and caulk as per Steps 81-82. Window Trims in
Step 85 will be installed to hide caulking.
Toll Free 1-888-658-1658
Bead of
caulking at
top edge.
www.outdoorlivingtoday.com
Page 40
Screw into thick
butt of siding.
Parts (Steps 81 - 83)
4AI - Large Window Inserts
(30 1/4"w x 35"h) x 2
Hardware (Steps 81 - 83)
(S2 - 1 1/4" Screws) x 16 total
Caulk
gap.
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
