Table of Contents
Advertisement
Bottom Front
Side Wide
Corner Trim
(22° scarf cut)
73.
From the Left Corner Trim package, locate 4W -
Bottom Front Narrow Corner Trim and 4X - Bottom Front
Side Wide Corner Trim. Position scarf joint of 4W tight
underneath scarf joint of 4U - Top Front Narrow Trim from
previous step. Secure with 8 - 1 1/2" Finishing Nails. Align
scarf joint of 4X with scarf joint of 4V - Top Wide Trim from
previous step. Attach with 8 - 1 1/2" Finishing Nails. Locate
Right Side Front Corner Trim Package and repeat as per
Steps 72-73.
soffit cap.
74.
Start by positioning 4Z - Rear Corner Narrow Trim tight
against soffit cap on rear wall siding. Next, position 4Y - Rear
Side Wide Corner Trim on side wall so it caps the narrow trim.
When correctly aligned, attach each trim with 10 - 1 1/2"
Finishing Nails. Have helper assist by holding trim. Repeat for
opposite side.
Toll Free 1-888-658-1658
Narrow trim tight
up against soffit
cap.
Narrow trim
caps wide trim.
Both trims even
at bottom.
www.outdoorlivingtoday.com
Scarf joint
cut.
Bottom Front (narrow)
caps Bottom Side (wide)
4W - Bottom Front Narrow Corner Trim
4X - Bottom Front Side Wide Corner Trim
Page 37
Parts
with 22° scarf cut top
(1/2" x 2 1/2" x 62") x 2
with 22° scarf cut top
(1/2" x 5 1/2" x 62") x 2
Tight up
against
rafter facia.
Parts
4Y - Rear Side Wide Corner Trim
with 11° cut top - mirrored
(1/2" x 5 1/2" x 91") x 2
4Z - Rear Corner Narrow Trim
(1/2" x 2 1/2" x 89") x 2
Hardware
(N1 - 1 1/2" Finishing Nails) x 40 total
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
