Table of Contents
Advertisement
40.
Position Rafter on gable wall framing. Locate 3F - Rafter Overhang
Spacer and place underneath front of rafter flush against upper wall plate
to determine front rafter overhang position. Inside of rafter should sit flush
with inside of gable wall framing. Clamp in position but don't attach yet.
Position opposite outside rafter as described and clamp in place as well.
131 1/2" outside rafter alignment
is very important for the roof to
fit correctly. Measurement is from
inside-to-inside of each rafter.
41.
Before attaching, measure rafter spacing to confirm 131 1/2" and make
adjustments as necessary. With Rafter correctly positioned, attach to side gable wall
framing with 8 - 2" Screws. Screw up from below the framing into rafter. Position other
outside rafter as above. Inside to inside measurement of rafters should be 131 1/2".
42.
Lift and place remaining
5 rafters on upper wall plates.
Space equally apart for now.
Toll Free 1-888-658-1658
Front Rafter
Overhang Spacer.
(14 1/2" long)
www.outdoorlivingtoday.com
Page 23
Rafter flush with
inside of side gable
wall framing.
Use clamps to hold
rafter in position.
sales@outdoorlivingtoday.com
Parts
3F - Rafter Overhang Spacer
(3F - 14 1/2" length) x 2
Hardware
S3 - 2" Screws
x 16 total
Advertisement
Table of Contents
