OLT STU128 Assembly Manual page 15

21.
Position 2D & 2F - Main Wall Side Top Plates on top of wall
studs so they are flush on the inside with 2x3 wall stud. There are
2 plates per side - 1 long & 1 short. Attach by screwing down into top
wall framing with 4 - 2" Screws per long plate & 3 - 2" Screws per
short plate.
Main front plates
installed in Step 30.
22.
Attach both 2D - Main Wall Rear Top
Plates with 4 - 2" screws per piece. Complete
remaining side wall plates as per Step 21.
Toll Free 1-888-658-1658
Top Plates should be flush
with inside of wall framing.
2D - Main Wall Rear Top Plates
(3/4" x 2 1/2" x 65 3/4") x 2
www.outdoorlivingtoday.com
Page 15
2D - Main Wall Side Top Plates
(3/4" x 2 1/2" x 65 3/4") x 2
2F - Main Wall Side Top Plates
(3/4" x 2 1/2" x 27 3/4") x 2
(S3 - 2" Screws) x 14 total
2" Screw
Parts
sales@outdoorlivingtoday.com
Parts
Hardware
Hardware
S3 - 2" Screws
x 8 total