Table of Contents
Advertisement
Reminder: Orientation of Trim
Pieces is important. Left/Right
pieces are mirror images with
rough side facing outward
71.
Position 4R - Filler Trim (they serve as nailing
strips) in corner of side wall, aligned flush with top of
bottom skirting. Attach with 4 - 1 1/4" Screws and
repeat for all 4 corners. Next, attach 4S & 4T -
Front/Rear Top Filler Trim with 2 - 1 1/4" Screws
per piece.
Top Front Wide
(22° scarf bottom /11°cut top)
Rear Side Wide
(11°cut top)
Rear Corner
Bottom Front Wide
(narrow)
(22° scarf top)
72.
There are 2 front corner trim packages (Left/Right) with 4
pieces per package which are needed to complete each corner.
Start with the left side corner trim package by placing
4U - Top Front Narrow Corner Trim tight underneath soffit cap
and 4V - Top Front Side Wide Corner Trim tight underneath
rafter facia so it is capped by the narrow trim. When correctly
aligned, attach each trim with 6 - 1 1/2" Finishing Nails. Have
helper assist by holding trim.
Toll Free 1-888-658-1658
11°cut top.
Top Front (narrow)
(22° scarf bottom)
Shipping
package length
restrictions requires
front/side trim to be cut
down in length, scarf joint-
ed and then attached
on assembly.
Bottom Front (narrow)
(22° scarf top)
www.outdoorlivingtoday.com
Filler Trims will get
covered in Steps
72-75 with proper
corner trim.
Parts
4R - Filler Trim
(7/8" x 2 1/2" x 72") x 4
4S - Front Top Filler Trim
(7/8" x 2 1/2" x 28 1/2") x 2
4T - Rear Top Filler Trim
(7/8" x 2 1/2" x 12") x 2
4U - Top Front Narrow Corner Trim
4V - Top Front Side Wide Corner Trim
with 22° scarf cut bottom / 11° cut top
(N1 - 1 1/2" Finishing Nails) x 56 total
Page 36
Small gap
between trims.
Hardware
S2 - 1 1/4" Screws
x 22 total
Outside
Soffit Cap.
Front (narrow)
caps side
Scarf joint cuts
on bottoms.
Parts (Steps 72 - 73)
with 22° scarf cut bottom
(1/2" x 2 1/2" x 46") x 2
(1/2" x 5 1/2" x 46 1/2") x 2
Hardware (Steps 72 - 73)
sales@outdoorlivingtoday.com
(wide)
Advertisement
Table of Contents
