Table of Contents
Advertisement
29.
Position 2L - Door Jambs against window wall vertical framing.
Jamb should sit even with the thick bevel siding on the outside and even
with framing on the inside. Attach with 5 - 2 1/2" Screws / piece.
Advice -
Check Door Opening now.
Width should be 38"
Height inside of wall plate = 80 1/4"
Confirm final size at Step 35
30.
Position 2D & 2E - Main Wall Front Top Plates on top of window
wall framing so they are flush on the inside with 2x3 wall stud. Align
plates on wall as per Step 21. There are 2 outside smaller plates (2E)
and 1 longer center plate (2D). Attach by screwing down into top of
wall framing with 2 - 2" Screws per shorter plate and 4 - 2" Screws
on the center plate.
Toll Free 1-888-658-1658
Even
Inside
.
www.outdoorlivingtoday.com
Page 18
Parts
2L - Door Jambs
(3/4" x 3 1/2" x 80 1/4") x 2
Hardware
(S1 - 2 1/2" Screws) x 10 total
Parts
2D - Main Wall Front Top Plate
(3/4" x 2 1/2" x 65 3/4") x 1
2E - Main Wall Front Top Plates
(3/4" x 2 1/2" x 35 5/8") x 2
Hardware
(S3 - 2" Screws) x 8 total
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
