Table of Contents
Advertisement
17.
Position side solid wall into place on plywood floor. Butt both vertical wall
studs of side and rear walls together and attach with 3 - 2 1/2" Screws. Screw at
the bottom, middle and top of stud to secure properly.
18.
With the corner wall attachment complete, position a second side wall
panel in place so bottom 2x3 wall framing is sitting flush with outside floor joists.
Wall siding should overhang floor by approximately 3/4". When positioned
correctly, attach both side wall panel studs together as per Step 17.
Toll Free 1-888-658-1658
2x3 wall framing flush with
outside of floor framing.
www.outdoorlivingtoday.com
Page 13
Optional - Caulking
seams will help prevent
moisture from entering
at seam. Caulking not
included in kit.
S1 - 2 1/2" Screws
Be sure that the
side wall panels fit
between the front
and rear wall panels
(sandwiched).
Hardware (Steps 18 - 20)
S1 - 2 1/2" Screws
sales@outdoorlivingtoday.com
Hardware
x 3 total
x 21 total
Advertisement
Table of Contents
