OLT STU128 Assembly Manual page 25

45.
With Rafter correctly positioned using the overhang spacer, attach a
90° Metal Bracket to each side of rafter and to the front upper wall top plate.
Use 4 - 1 1/4" Screws per bracket. Proceed to next rafter. Use overhang spac-
er to position rafters correctly front to back and attach with two 90° brackets as
described. Complete all remaining front interior rafter attachments.
46.
Slide Rafter Spacer Jig down to the rear. attach a 90° Metal Bracket
to each side of rafter and to the rear wall top plate. Use 4 - 1 1/4" Screws
per bracket. Complete all rear attachments of remaining interior rafters.
47.
Locate 3C - Rafter Facia. Position 2 pcs on
outside rafter carefully lined up with ends and sides.
Attach each piece with 3 - 2 1/2" Screws. Complete
both sides.
Toll Free 1-888-658-1658
3C - Rafter Facia
11° angle cut ends
(1 3/8 x 2 1/2" x 59 1/2") x 4
www.outdoorlivingtoday.com
Page 25
S2 - 1 1/4" Screws
Y2 - 90° Metal Bracket
Hardware
(S2 - 1 1/4" Screws) x 40 total
(Y2 - 90° Metal Bracket)
Parts
(S1 - 2 1/2" Screws)
sales@outdoorlivingtoday.com
Hardware
x 40 total
x 10 total
x 10 total
Hardware
x 12 total