Table of Contents
Advertisement
59.
Locate and position 4E - Rear Soffit Caps
underneath rear rafter, tight against wall and
aligned with rafter seam as per Step 55 Cap
should not extend past end of rafters. Attach with
2 - 1 1/2" Finishing Nails. Complete opposite
side cap now.
Locate 4F- Rear Soffits (Tongue & Groove) &
4G - Rear Soffits (with tongues cut off).
Start by fitting 2 pieces together (1 wide and 1
narrow) as shown to the right. Assemble other 2
pieces the same way.
Toll Free 1-888-658-1658
Center Soffit Cap.
www.outdoorlivingtoday.com
Page 31
Rear Soffit Cap.
sales@outdoorlivingtoday.com
Small Gap.
Tongue cut off-
(narrow pc.)
will be against
shed.
Advertisement
Table of Contents
