OLT STU128 Assembly Manual page 11

2. Wall Section
Exploded view of all parts necessary to complete the Wall Section. Identify all parts prior to starting.
Rear Extender Walls -
3pcs. (Part 2G)
Upper Rear
Wall Plates
11°
- 2pcs.
edge cut
(Part 2K)
Upper Front Wall
Plates
11° edge cut
- 2pcs. (Part 2J)
Solid Wall
Panel - 7pcs.
(Part 2B)
Main Wall Front Top Plates -
3pcs. (Parts 2D & 2E)
13.
Identify all wall section
components and become familiar with
their location.
There will be 2 Window Wall Panels,
7 Solid Wall Panels, 4 trapezoid
shaped Side Gable Walls, 3 Rear
Extender Walls and Top Plates
(upper and lower).
Make sure to position panels right
side up so water is directed away
from and not into shed. Look at
window wall panels to determine
proper wall position to confirm.
(Walls may have a QC colored dot on
them, these won't be visible on the
shed, please ignore them).
Toll Free 1-888-658-1658
Door Jambs -
2pcs. (Part 2L)
Upper Top Plates
www.outdoorlivingtoday.com
Page 11
Main Wall Side/Rear Top Plates
- 6pcs. (Parts 2D & 2F)
Front Window Wall
Panels - 2pcs. (Part 2A)
Top Plates
sales@outdoorlivingtoday.com
Rear Side Gable Walls
- 2pcs. (Part 2H)
Front Side
Gable Walls
- 2pcs. (Part 2I)
Upper Front Window
Walls Left/Right
- 2pcs. (Part 2M)
Upper Front Window
Wall Centre - 1pc.
(Part 2N)
Upper Top Plates
Bottom Wall Plate