Table of Contents
Advertisement
26.
From the outside, siding of gable will overlap side wall. When aligned, secure gable with
5 - 2 1/2" Screws. On a ladder, push extender wall and gable wall together tight and then screw.
27.
Position bottom frame of 2I - Front Side Gable Wall onto side wall top plate. Align so gable wall and
side wall 2x3's are even. Front gable vertical frame will sandwich against front window wall vertical frame.
When correctly aligned, attach with 6 - 2 1/2" Screws. Complete other side the same.
Extender
Wall
28.
Position 2K - Rear Upper Wall Plates on rear
extender wall framing, flush with inside of extender
framing and even with outside wall. Attach each piece
with 4 - 2" Screws.
Toll Free 1-888-658-1658
Front Side
Gable.
Gable wall
framing.
Flush
2K - Rear Upper Wall Plates - 11° angle on face
www.outdoorlivingtoday.com
Page 17
2" Screw.
Even
Parts
(3/4" x 2 1/2" x 68 1/4") x 2
Hardware
(S3 - 2" Screws) x 8 total
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
