Table of Contents
Advertisement
3. Rafter and Roof Section
47" (short)
72" (long)
Even sides
and ends.
37.
Rafters need to be assembled before laying of roof. There will be
7 completed rafters when pieces are attached together. There are 4 pieces
of "2x4" for each rafter. 2 pcs of 47" Length & 2 pcs of 72" Length. When
attached together, total length of rafter will be 119". On solid ground, locate
2 of 3A - Rafter Sections -Short and 2 of 3B - Rafter Sections -Long and
position as illustrated above. Starting on one side, line ends and sides up
even. Use clamp to hold in position. Attach together with 10 - 2 1/2" Screws.
39.
Before attaching
rafters measure between
gable wall framing. Make
sure distance between
inside framings is 131 1/2".
Be sure to evenly space
rafters on framing before
attaching in Step 40.
Toll Free 1-888-658-1658
131 1/2"
www.outdoorlivingtoday.com
Page 22
47" (short)
Parts (Steps 37 - 38)
3A - Rafter Sections -Short
(1 1/2" x 3 1/2" x 47") x 14
3B - Rafter Sections -Long
(1 1/2" x 3 1/2" x 72") x 14
Hardware (Steps 37 - 38)
S1 - 2 1/2" Screws
x 70 total
38.
Complete attachments of
all 7 Rafters now.
Hint - Occasionally wood can
twist, use clamps to straighten
as best you can before
screwing.
Important
You will need two large
ladders (7 ft or 8ft high)
during most of the remaining
steps of this manual.
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
