4Ag: 2 - 1/2" X 2 1/2" X 84" - Vertical Door Trim; 4Ah: 1 - 1/2" X 3" X 44 1/2" - Horizontal Door Trim (Angle Cut - Bottom Corners) - OLT STU128 Assembly Manual

78.
With door leveled in opening, open door and secure casing to shed framing
where you shimmed. Use 2 - 2 1/2" Screws on top and 3 - 2 1/2" Screws on
each side. Do not screw into threshold.
79.
Before trimming door out, open/close door and confirm for
level. Make any adjustments now. Locate 4AF - Above Door Filler
Trim - Bevel. Position over door casing with thick end of piece up
and recessed slightly. Attach with 4 - 1 1/2" Finishing Nails.
80.
Position 4AG - Vertical Door Trims and
4AH - Horizontal Door Trim over door casing,
recessed slightly. Attach 4AG with
8 - 1 1/2" Finishing Nails and 4AH with
4 - 1 1/2" Finishing Nails.
Toll Free 1-888-658-1658
Screw near bottom on both
sides where door was
shimmed. Not into threshold.
Horizontal Door
Trim (with angle
cut bottom corners)
Vertical Door
Trim.
4AG - Vertical Door Trim
(1/2" x 2 1/2" x 84") x 2
4AH - Horizontal Door Trim
(1/2" x 3" x 44 1/2") x 1
www.outdoorlivingtoday.com
Page 39
Above Door
Filler Trim.
4AF - Above Door Filler Trim - Bevel
(3/4" x 2 1/2" x 40") x 1
(N1 - 1 1/2" Finishing Nails) x 4 total
Parts
N1 - 1 1/2" Finishing Nails
sales@outdoorlivingtoday.com
Hardware
S1 - 2 1/2" Screws
x 8 total
Parts
Hardware
Slightly
inset.
Hardware
x 20 total