Rear - OLT STU128 Assembly Manual

75.
Place 4AB - Top Side Trim first up
against rafter facia and evenly spaced to
cover wall seam. Attach with 4 - 1 1/2"
Finishing Nails. Place 4AC - Bottom Side
Trim against wall seam and line up scarf
joints. Attach with 4 - 1 1/2" Finishing Nails.
Complete other side now.
76.
Position 4AD - Rear Wall Trim up tight underneath
rear soffit and evenly spaced to cover wall seam. Attach
with 8 - 1 1/2" Finishing Nails. Complete both trims
now.
4AD - Rear Wall Trim
(1/2" x 2 1/2" x 89") x 2
(N1 - 1 1/2" Finishing Nails) x 16 total
77.
Locate 4AE - Pre-Hung Door. Door opening is 38" w x 80 1/4" h. Place
door in opening. Use 4AO - Shim Shingles to shim door tight in cavity. Once
shim is wedged in, cut excess shingle wood off. Insert 4-8 shim shingles.
Toll Free 1-888-658-1658
Trim covers
wall seam.
Parts
Hardware
Advice - Pre-Hung Door is made
with Fiberglass and primed off
white. We suggest painting the
door prior to installing. Consult
you local paint dealer for most
suitable product.
Small gap
between jamb and
casing.Use shim
shingle to tighten.
www.outdoorlivingtoday.com
Scarf joint cuts on top
and bottom trims.
Parts
4AB - Top Side Trim
with 22° Scarf cut / 11° cut top
(1/2" x 2 1/2" x 37 3/4") x 2
4AC - Bottom Side Trim
with 22° Scarf cut top
(1/2" x 5 1/2" x 62") x 2
Page 38
Hardware
N1 - 1 1/2" Finishing Nails
x 16 total

Rear

trim.
Threshold
Parts
4AE - Pre-Hung Door
(37 1/2" x 80") x 1
(4AR - Shim Shingles) x 8
sales@outdoorlivingtoday.com
Tight up
against
rafter facia.