System; Display; Battery - Ko Propo EX-NEXT Instruction Manual

SYSTEM

You can make various settings related to the system.
FUNCTION
MODEL TIMER
3 - 8CH
SYSTEM 1/2

DISPLAY

BATTRY
SOUND VRINFO
DISPLAY
You can set the LCD monitor.
DISPLAY ガメン
CONTRAST ノウド CONTRAST
LIGHTMODE LIGHTMODE
バックライト
LIGHTTIME ライトタイム LIGHTTIME
Setting Range
CONTRAST : 1 - 5(Default : 4)
Adjust the display density.
Decrease the number to make it lighter, and increase it to
make it darker.
As a characteristic of liquid crystal displays, they tend to appear
P
darker when it gets warmer and lighter when it gets colder. You
don't have to adjust it often. If you are concerned about the display
density, adjust it.
LIGHTMODE
Back light mode : OFF, ON, KEY-ON
(Default : KEY-ON)
Set the lighting method.
OFF : Always off ON : Always on
KEY-ON : Lights when a key is operated
LIGHTTIME : 1 - 60 (Default: 5)
When the backlight mode is KEY-ON, specify the time
(seconds) for temporarily turning off the backlight after
stopping key operations (other than steering and throttle).
When the backlight is set to KEY-ON, it lights up when the keys
(ET, BT) are operated. It does not light when steering or throttle
operation.
KEYSET
SYSTEM
TLMY
CALC.
CONFIG
4 4
KEY-ON KEY-ON
5 5

BATTERY

Select the type of battery to use.
DRY
NI-MH
Setting range
DRY (alkaline batteries)
Warning buzzer 4.0V or less
Warning buzzer / stop operation 3.8V or less
LIFe (lithium ferrite battery)
Warning buzzer 6.2V or less
Warning buzzer / stop operation 6.0V or less
NI-MH (nickel metal hydride battery)
Warning buzzer 4.0V or less
Warning buzzer / stop operation 3.8V or less
LIPO (lithium polymer battery)
Warning buzzer 7.0V or less
Warning buzzer / stop operation 6.0V or less
By specifying the power supply (battery type) to be used, a warning
P
message is displayed before the discharge termination voltage.
The transmitted signal will not be cut immediately, but it may cause
control problems, so charge it immediately or replace the battery.
If you accidentally set the battery type, you can
P
press and hold the BACK key to cancel the warning
message and display the initial screen. Reset to the
correct battery.
Example)
When using a dry battery, the LIPO mode is selected
and the operation stop mode cannot be exited.
After changing the battery / battery, be sure to
check the battery type. !!
If the settings are different from the battery you are using, it will
over-discharge and damage the battery. Please be careful as it
may cause a fire.
41
BATTERY
LIFe
LIPO