■ Procedures Prior to Operation
■ Procedures Prior to Operation
1. Switching On
After ensuring that it is safe to do so, switch on the transmitter followed by the receiver.
2.Model Confirmation
Confirm the model which will be used.
3.Checking Movements
With the model's wheels lifted off the ground, operate transmitt er to check for proper
movement. While driving, use steering and throttle trims to make fine adjustments. Drive in a
figure 8 pattern t o check steering balance.
4.Switching Off
After a driving session, switch off the receiver,followed by the transmitter. Remove
the battery pack from the model.
After switching off, wait at least 5 seconds before switching on again to ensure proper operation.
Figure 8 Pattern
Stand
Trim lever
13