Timer; Timer Start; Trgstart; Lap History - Ko Propo EX-NEXT Instruction Manual

TIMER

Operating Timer-related functions.
FUNCTION
MODEL
3 - 8CH
<Function over view>

TIMER START

Start the timer

TRGSTART

Prepares the stopwatch for activation via the throttle movement.

LAP HISTORY

Displays the lap times recorded by the stopwatch.

START/STOP KEY

Assigns a key to activate/deactivate the stopwatch.

LAP KEY

Assigns a lap key.
>>>
The following page is displayed.
LAP NAVI
Adjusts the lap navigation settings.
ALARM TIME
Alarm will sound after the set amount of time has elapsed.
P.ALARM
Sets a warning buzzer to sound at a set time prior to the alarm.
ALARM MODE
Sets an alarm buzzer to the continue sound mode (CONTINUE) or
to the sound stop mode(STOP).
TIMER MODE
The lap timer or down timer can be selected.
<<<
The front page is displayed
TIMER START
When the cursor is highlighting the TIMER START,
ENTER key is pressed and held to start the timer.
TIMER タイマー
TIMER タイマー
While the timer is running and the BACK key is pressed,
the timer is halted. While the timer is halted, pressing the
BACK key again will return you to the TIMER screen.
KEYSET
TIMER
SYSTEM
TLMY
TRGSTART
Move the cursor to [TRGSTART] and hold the ENTER key.
TRGSTART will switch to READY for a brief moment, then push
assigned [START/STOP] key or move throttle trigger.
TIMER タイマー
LAP HISTORY
Displays the laptime records the stop watch. Scrolldown when
the R key is pushed, and scrollup the L key is pushed. When
pressing the BACK key, you are returned to the Timerscreen.
LAPHISTORY ラップキロク
001 00ʼ 02ʼʼ 20
002 00ʼ 05ʼʼ 51
003 00ʼ 05ʼʼ 09
004 00ʼ 04ʼʼ 72
005 00ʼ 02ʼʼ 70
TTL 00ʼ 20ʼʼ 25
P
100 lap times are memorized.
Only the last recorded lap times may be checked and
previously recorded results will not be saved. (Even if the
transmitter is switched off, the last recorded times will remain
in the memory.)
START/STOP KEY
The key which you start and stop the timer is assigned
Setting Range : OFF,ET1- 5,BT1(Default: OFF)
LAP KEY
The key which will score the lap time is assigned.
Setting Range : OFF,ET1- 5,BT1(Default: OFF)
If you assign OFF after assigning an ET or BT to START/STOP
KEY or LAP KEY, KEY SET will be OFF. So please be aware
the assigning keys that are used by other functions.
>>>
>>>Press the ENT key on the mark to display the next page.
29