Dynamc; Curve; Punch - Ko Propo EX-NEXT Instruction Manual

Table of Contents

Advertisement

DYNAMC

Set the operating characteristics of the throttle.
THROTTLE 1/3
TRAVEL
DYNAMC
TH DYNAMICS ダイナミクス
N
F
CURVE F
Throttle Curve Forward
Modify the movement speed ratio which corresponds to how
much throttle is applied.
CURVE B
Throttle Curve Brake
Modify the movement speed ratio which corresponds to how
much throttle brake is applied.
PUNCH F
Throttle punch Forward
Modify how much the throttle initially accelerates from neutral
position.
PUNCH B Throttle punch Brake
Modify how much the brake initially accelerates from neutral
position.

CURVE

This function sets the signal conversion rate to a curve to
enable quicker or milder response. Likewise, braking can also
be set to a braking curve.
Setting Range
TH CURVE F : -100 to 0 to 100%
(Default : 0%)
TH CURVE B : -100 to 0 to 100%
(Default : 0%)
When [Throttle Punch] is activated, the characteristics of the
P
throttle curve value is also added to the Throttle Punch value.
P
Positive values (+1 to +100) equal high initial response followed by
mild response.
Negative values (-1 to -100) equal a mild initial response followed
by high response.
P
When using this in conjunction with other functions, adjust one at a
time to confirm their effects to produce an effective overall setting.
P
This function adjusts only the curve. Use the [Throttle Punch]
function if you wish to adjust the initial response.
TRIM
SPEED
REVERS
FEEL
 CURVE
カーブF
0
カーブB
 PUNCH
パンチF 
B
パンチB 
%
%
%
%

PUNCH

This function quickens the throttle's initial response and can be
used to instill a sense of power when the throttle initially moves
from neutral.
Setting Range
TH PUNCH F : 0 to 50%
(Default : 0%)
TH PUNCH B : 0 to 50%
(Default : 0%)
P
The larger the value, the larger the amount of throttle movement.
However, depending on other settings, the throttle operation may
become jagged.
P
If using this in conjunction with other functions such as [Throttle
ABS], confirm the operation before using.
55
Quick
Trigger Operation
Neutral
Middle
Trigger Operation
Neutral
Middle
Mild
Full
Full

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ko10664

Table of Contents