Config; Data - Ko Propo EX-NEXT Instruction Manual

SYSTEM

CONFIG

Change the operating environment settings of the Xpansion
unit.
KEYSPEED ｷｰｿｸﾄﾞ
KEYSPEED
ｷｰｿｸﾄﾞ
MENUSPEED
ﾒﾆｭｰｿｸﾄﾞ
<Function list>
KEYSPEED
Set the interval at which the operation repeats when the L /
R keys are held down.
Setting Range
KEYSPEED : OFF to 5(Default : 3)
MENUSPEED
Set the interval at which the operation is repeated when the
L / R keys are held down when moving the menu.
Setting Range
MENUSPEED : OFF to 5(Default : 3)
P
If the set value is OFF, the operation will not be repeated. The
larger the setting, the shorter and faster the repeat interval.
It is not reflected in the ET and BT keys, and the set value is fixed.
LANGUAGE
Switches the menu display language.
Setting Range
LANGUAGE : ENGLISH / JAPANESE
(Default : ENGLISH)
P
Language switching is applied after moving from the CONFIG
screen to the SYSTEM screen with the BACK key.
OPERATIONTIME
A warning buzzer sounds when the set time is exceeded
for no operation. The alarm is canceled by operating the
steering wheel / throttle trigger, ET key, BT key, ENT key, L /
R key, and BACK key.
Setting Range
OPERATIONTIME : OFF to 3min
(Default : 3)
USERTIMER
The time when the power is turned on is integrated and
displayed.
P You can reset the timer by moving the cursor to USERTIMER and pressing and
holding the ENT key.
ELPASSEDTIME
The time when the power is turned on is integrated and
displayed.
P
The ELPASSED TIME timer cannot be reset.
3
3

DATA

Reads and writes model data.
SYSTEM 2/2
DATA
MODEL DATA EDIT
TIMER タイマー
PLEASE CONNECT
TIMER START
ICS-USB ADAPTER TO
TRG START
COMMUNICATION PORT
LAP HISTORY
ON THE FRONT OF
START/STOP KEY
XPANSION.
LAP KEY
TIMER タイマー
TIMER START
TRG START
READ EX-NEXT＞＞＞PC
LAP HISTORY
WAIT PC >>>EX-NEXT
START/STOP KEY
LAP KEY
EXIT >> POWER OFF
1. Press the ENT button on START to switch
to the communication screen and enter the
communication standby state.
2. Connect the communication cable of the ICS
USB adapter HS to the communication port of
the expansion unit.
3. Open "EX-Manager Ver2.0" on your PC and
save and write the model data.
Be sure to turn on the power of EX-NEXT before connecting the
ICS USB adapter HS and the expansion unit.
44
RESET
TIMER
OFF
OFF
START
TIMER
OFF
OFF