Dynamc; Curve; Punch - Ko Propo EX-NEXT Instruction Manual

DYNAMC

Settings related to steering control.
ST DYNAMICS ダイナミクス
N
L
CURVE Steering Curve
Modify the movement speed ratio which corresponds to
steering angle.
PUNCH Steering Punch
Modify how much the steering initially turns from neutral
position.
CURVE Steering Curve
This function adjusts the ratio of the steering angle to servo
movement speed (Curve Characteristics). Choose between (+)
Quick Curve and (-) Mild Curve.
Setting Range
ST CURVE : -100 to 0 to 100%
(Default : 0%)
Example
Modify the movement speed ratio which corresponds to steering
angle.
As the graph shows, servo movement speed can be changed
P
according to wheel movement angle.Positive values (+1 to +100)
equal high initial response followed by mild response. Negative
values (-1 to -100) equal a mild initial response followed by high
respons.
When using this in conjunction with other functions such as [Steering
P
Speed], adjust one at a time to confirm their effects to produce an effective
overall setting.
P
To adjust only the steering's initial response, use the P [Steering
Punch] function.
CURVE
ｶｰﾌﾞ %
0
PUNCH
ﾊﾟﾝﾁ ０ %
R
Steering Operation
PUNCH Steering Punch
This function quickens the steering's initial response and can
be used to instill a strong turning movement when the steering
initially moves from neutral.
Setting Range
ST PUNCH : 0 to 50%)
(Default : 0%)
P
The larger the value, the stronger the amount of turning P
movement.
This could be effective if steering linkages have a lot of slop, but
P
please note that it does not improve straightline
performance.
When using this in conjunction with other functions such as [Steering Speed],
P
adjust one at a time to confirm their effects to produce an effective overall setting.
50
Steering Operation