Keyset - Ko Propo EX-NEXT Instruction Manual

KEYSET

Assign a key (ET1- ET5, BT1) to a function.
FUNCTION
MODEL TIMER
3 - 8CH
If you select a key, the item is displayed to the right.
It is assigned to a key by choosing an item.
KEYSET キーセッテイ
ET 1：S：TRIM ET 1：S：TRIM
ET 2：T： TRIM ET 2：T： TRIM
ET 3：T:BRAKE ET 3：T:BRAKE
ET 4：S:TRAVEL ET 4：S:TRAVEL
ET 5：OFF ET 5：OFF
BT 1：OFF BT 1：OFF
Setting Range
○: Assignment Possible
Function Setting
OFF(No Assignment)
S:TRIM(Steering Trim)
S:TRAVEL(Steering Travel)
S:FEEL(Steering Feel)
T:TRIM(Throttle Trim)
T:HIPOINT(Throttle High Point)
T:BRAKE(Throttle Brake)
T:FEEL F(Throttle Feel F)
T:FEEL B(Throttle Feel B)
T:OFFSET(Throttle Offset)
T:OFSTKY(Throttle Offset Key)
T:BRAKEOR(Throttle Override)
T:ACCEL(Throttle Acceleration)
T:ABS(ABS)
T:AUTOST(Throttle Auto start)
TIMER(Timer)
LAPTIME(Lap time)
Default
ET1 : S:TRIM
ET2 : T:TRIM
ET3 : T:BRAKE
ET4 : S:TRAVEL
ET5 : OFF
BT1 : OFF
About Direct Display
P
The display screen for a function which is assigned to
ET1-5/BT-1 is displayed for 3 seconds when you operated
each ET or BT.If there is no operation after the allotted
time, the screen returns automatically to the original
screen.(Direct Display Function)
KEYSET
SYSTEM
TLMY
KEYSET
OFF OFF
S：TR IM S：TR IM
S：TR AVEL S：TR AVEL
S：FEEL S：FEEL
T：TR IM
T：TR IM
T：H IPO INT T：H IPO INT
ET1- 5
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
ET2
ET4
Example of operation
If you operate the ET2 in the upper direction from the
initial screen display, the screen will change to TH trim
screen display and TH trim value will change to "F1".
The screen will go back to the previous display after 3
seconds.
MONITOR XT-TMG DR5.8V
STEERING MODEL
THROTTLE
FUNCTION STEERING THROTTLE
BT1
The initial screen Display
○
x
x
x
x
x
The TH trim screen display
x
x
Direct display function will not work while in the MODEL
x
menu or the SYSTEM menu. Please change the menu
○
screen to another by pressing the back key.
x
Non-choice item
○
The entry of each function are displayed only when a key is set to each function
○
settings.
○
3 - 8 : POS (3-8CH/ Control)
○
3(4) : SMMODE (3 4CH/4WS Mixing Mode)
○
3(4) : SMCENT (3 4CH/4waMixing Center)
○
3(4) : SMTRVL (3 4CH/4WS Mixing Travel)
3(4) : AMMODE (3 4CH/ Amp Mixing Mode)
3(4) : AMTH (3 4CH/ Amp Mixing Hold)
3(4) : AMHIPO (3 4CH/ Amp Mixing High point)
3(4) : AMBRAKE (3 4CH/ Amp Mixing Hold)
3(4) : AMRVS(3 4CH/ Amp Mixing Reverse)
3(4) : TMBRAKE(3 4CH/ Throttle Mixing Brake)
3(4) : TMCENT(3 4CH/ Throttle Mixing Center)
3(4) : TMHIPO(3 4CH/ Throttle Mixing High point)
3(4) : TMDELAY(3 4CH/ Throttlr Mixing Delay)
3(4) : TMSTEER(3 4CH/ Throttole Mixing Steer)
3(4) : TMON(3 4CH/ Throttle Mixing on off)
T : PUSH(Throttle Push control)
T : BRK-IN(Throttle Break in)
T : H-BRK(Throttle Hand Brake)
* H-BRK(Hand brake )can not be set to ET-4
31
E T1
ET1
ET3
B T 1
BT1
ET5
NO.01
ET2 ET2
ET2
Operate the ET2 in the upper direction
MONITOR
STEERING
THROTTLE
FUNCTION STEERING THROTTLE
The screen will go back to
the previous display after 3
seconds.
XT-TMG DR5.8V
MODEL NO.01