Adjustment Of Steering Wheel And Throttle Trigger; Steering Wheel Extension Unit; Replacement Of Color Pad And Grip (Optional Available) - Ko Propo EX-10 Eurus Instruction Manual

Adjustment of steering wheel and throttle trigger

Steering wheel spacer
Reduces movable range of steering wheel.
Tech tip
1.
Detach steering sponge from steering wheel.
2.
Insert hex wrench (2mm) as shown. Tighten both right and
left screws to adjust movable range.
3.
Re-attach steering sponge.
4.
Adjust steering angle using volume adjustment (see P26)
to maintain maximum steering angle.
Initial setting: Tip of screw's face is flush with the inside of the spacer.
Multi-angle 3D adjustable trigger
Freely adjust brake and throttle trigger's position and angle.
Tech tip
1.
Loosen screws using hex wrench (1.5mm).
2.
Freely adjust brake trigger.
3.
Tighten screws to fix brake trigger.
The trigger may be loosened by temperature, strong shock or after long use.
To avoid the trigger loosened, gluing is also effective.

Steering wheel extension unit

Mounting angle of steering wheel can be adjusted.
Attach on transmitter (refer to manual included in set for installation).
Tech tip
1.
Loosen screws under steering wheel extension unit using
hex wrench (3mm) as shown.
2.
Adjust mounting angle.
3.
Tighten screws to fix.
Replacement of color pad and grip (option)
Color pad and grip are optional available.
Detachment
Extend grip end outward (1) and pull out (2).
Pull out pad toward the arrowed direction (3),
then detach tab (4).
Attachment
Attach pad and grip in the reverse procedures of detachment.
Attach tab (4), then insert pad end (3).
Attach grip by inserting tabs (2) and insert grip end (1).
Steering wheel (inside)
Hex wrench (2mm)
Throttle trigger
Brake trigger
Steering wheel (under view)
Pad
Grip
Screw
Steering wheel
Spacer
Screw
Ball joint
Screw
9