Tlmy Telemetry; Rf Mode; Pairing - Ko Propo EX-NEXT Instruction Manual

TLMY Telemetry

Change RF mode, Pairing, Take data from receiver, Fail safe,
Real Time ICS( Servo setting) are able to operated.
FUNCTION
MODEL TIMER
3 - 8CH
TELEMETRY
RFMODE
BT F/S
Except TLMY mode, displayed only RF mode and RESP,RELICS,
BT F/S are not displayed.

RF mode

Operate RF mode change and Pairing Setting.
RF MODE
TIMER タイマー
RF MODE:
TIMER START
TRG START
WIDTH :
LAP HISTORY
START/STOP KEY

PAIRING

LAP KEY
Setting Range
RFMODE : ADV/TLMY/MX-F (Default : TLMY)
Telemetry / REAL TIME ICS functions are available only for
devises which are connection to B/S port of the corresponding
receiver. Traditional servos/ESC/battery connections to 1-4CH
terminals will not work.
WIDTH
Switch between general / French mode.
RF MODE
TIMER タイマー
RF MODE:
TIMER START
TRG START
WIDTH :
LAP HISTORY
START/STOP KEY
PAIRING
LAP KEY
Setting Range
WIDTH : GENERAL/FRANCE (Defaulet : GENERAL)
P
What is France mode in the Width setting.
This is a change in the communication pattern between
the EX-NEXT and the receiver. When instructed by a track
administrator, please use the French mode, otherwise please
use the general mode.
KEYSET
SYSTEM
TLMY
RESP RELICS
TIMER
TLMY
GENERAL
OFF
OFF
TIMER
TLMY
GENERAL
OFF
OFF
PAIRING
Pairing with the receiver.
TIMER タイマー
RF MODE:
TIMER START
TRG START
WIDTH :
LAP HISTORY
START/STOP KEY
LAP KEY
EXIT >>
Move the cursor to Pairing and press and hold the ENTER key.
The display will change to the Pairing screen and will begin to
send the radio wave for Pairing.
Please refer to page 19 for the Pairing operation.
Please you must perform the pairing operation (
with the receiver when you change the RF mode.
37
RF MODE TIMER
TLMY
GENERAL
OFF
PAIRING
OFF
BACK KEY!
p.19
)