Override; Break In - Ko Propo EX-NEXT Instruction Manual

OVERRIDE

Arrange another maximum brake setting and steering travel
setting, which can be activated/deactivated by the ET lever or
BT button.
THROTTLE 2/3
CYCLE
BRK-OR
OVERRIDE ｵｰﾊﾞｰﾗｲﾄﾞ
KEY
キー
BRAKE
ﾌﾞﾚｰｷ
STTRAVEL
STﾄﾗﾍﾞﾙ １００
KEY
Assigns a key to be used to activate/deactivate the
override.
BRAKE
Sets the brake override's brake setting.
ST TRAVEL
ST TRV L
ST TRV R
Adjust the steering angle according to the driving
conditions to make the car easier to control.
Setting Range
KEY : OFF, ET1 to 5, BT1
BRAKE : 0 to 150
ST TRAVEL : 0 to 150
Example(Brake over ride)
Switch to the throttle brake value while driving when the road
surface conditions are expected to change.
Example (Steering travel over ride
This is convenient when you want to stabilize the straight line
by reducing the steering amount when driving in a straight line
with an oval car.
[OR] Display on the Function Monitor!
P
When the override is enabled by operating the key assigned by
[KEY], "OR" is displayed on the function monitor on the initial
screen. If [KEY] is turned OFF while "OR" is displayed on the
function monitor of the initial screen, the display of "OR" on the
function monitor of the initial screen also disappears.
P
If you want to switch the setting value only for the brake override,
the steering travel override value is also valid at the same time.
If you do not want to change the steering travel value, enter the
same value for steering travel and steering travel override.
ATSTRT
OFFSET
H-BRK
BRK-IN
0FF
１００
(Default: OFF)
(Default: 100)
(Default: 100)
BREAK-IN
Fix the throttle operation for the set time.
THROTTLE 2/3
CYCLE
BRK-OR
REVERSE リバース
ST REVERSE
ｽﾃｱﾘﾝｸﾞﾘﾊﾞｰｽ
TH REVERSE
ｽﾛｯﾄﾙ ﾘﾊﾞｰｽ
KEY
Set the key to operate start / stop break-in function.
RUNTIME
Sets the break-in function operation time.
FORWARD
Sets the operation amount of the break-in function.
Setting Range
KEY : OFF, ET1 to 5, BT1
RUNTIME : 1 to 240
FORWARD : 0 to 50
P
It is a convenient function for agitating the oil of the gear
differential and rings of a ball differential before starting to run.
Please adjust the set amount of RUNTIME and FORWARD
according to your preference.
When the break-in function is activated, the buzzer will continue to
ring.
You can forcibly stop by pressing the KEY set while the break-
in function is in operation.
60
ATSTRT
OFFSET
BRK-IN H-BRK
NORM
NORM
(Default: OFF)
(Default: 5)
(Default: 10)