Name Of Parts; Unit Preparation; Receiver Batteries - Ko Propo EX-5UR Instruction Manual

Name of parts

LCD display (factory setting)
Model name (MENU26)
LCD indicates voltage after a certain period of time.
※Alarm sounds when batteries are depleted. Install fresh
batteries as soon as possible to keep radio power.
●Receiver （ KR-407S）
Channel 1∼4 connector
Battery connector
Set button LED indicator
※Regarding servo and ESC, please refer
each set-supplied instruction manual.

Unit preparation

1.
Install receiver, servo, ESC (when using with electric car) and connect cables. Install
receiver noting anti-noise measures. ←Refer to P.4
※Read instructions included with servo and speed controller before connection and usage.
2.
Install batteries (R6/AA/UM3 size batteries x
8) to transmitter, then install running battery
to electric R/C car. For gas R/C car, install

receiver batteries.

※Note polarity and install fresh batteries. Depleted batteries
may deteriorate radio power and cause problems.
3.
Register the transmitter to the receiver to complete "pairing"←Refer to P.5
※EX-5UR requires "pairing" to register the transmitter ID number to the receiver the first time you use.
When operating several receivers (cars) using one transmitter, perform "pairing" for each receivers only first time you use.
4.
Adjust steering and throttle/brake settings ←Refer to P.5
5.
Adjust failsafe ←Refer to P.15
●Transmitter
（EX-5UR）
Voltage
ET3 lever
(Steering travel)
ET4 lever
(3ch control)
Transmitter (bottom)
■ Name of parts／Unit preparation
ET1 lever
Antenna
(Steering trim)
Steering wheel
Battery box
Battery cover
ET2 lever
(Throttle trim)
Foward key
+/ Enter key
−/ Cancel key
Back key
Power switch
Throttle trigger
Battery box (inside)
R6/AA/UM3 battery
3