Preparations; Battery Installation; Battery Level Warning - Ko Propo EX-NEXT Instruction Manual

■ Preparations

■ Preparations
●Battery Installations
1.
Press the tab on the bottom of the transmitter
to open battery box cover.
Battery Box Cover
2.
Remove the lock to pull out
battery box.
3.
Install four R03/AAA/UM4
alkaline batteries while noting
their polarity, then replace
battery box.
Battery Box
Use batteries which have adequate remaining
capacity. Weak batteries mean lower transmitting
power and may result in malfunctions.
① ①
② ②
① ①
② ②
R03/AAA/UM4
B a t t e r i e s ( 4 p c s . )
*Sold separately
●Battery Level Warning
A warning will be displayed with the LED flashing and
an alarm will sound when battery voltage is less 4v.
When you see this warning, stop your model in a safe
area, turn it off and install new transmitter batteries.
When using a Li-Po / Li-Fe battery, be sure to
change the expansion battery setting (p.41)
because it is necessary to warn before the voltage
drops to 4V.
8