St Speed; St Turn; St Return - Ko Propo EX-NEXT Instruction Manual

ST SPEED

Modify the speed of the steering servo movement.
ST SPEED スピード
ST TURN 100
ﾀｰﾝｽﾋﾟｰﾄﾞ
ST RETURN 100%
ﾘﾀｰﾝｽﾋﾟｰﾄﾞ
TURN POS Steering Turn Position
The range of movement of the steering wheel for TURN1
and TURN2 speed settings can be set.
TURN 1 Steering Turn Speed 1
The speed from neutral to TURN POS range of the steering
wheel movement is set.
TURN 2 Steering Turn Speed 2
The speed from TURN POS to end point range of the
steering wheel movement is set.
RETURN POS Steering Return Position
The range of movement of the steering wheel for returning
to neutral for RTRN1 and RTRN2 speed settings can be set.
RTRN 1 Steering Return Speed 1
The speed of the return from RETURN POS to neutral of
the steering is set.
RTRN 2 Steering Retuen Speed 2
The speed of the return from end point range to RETURN
POS of the steering is set.

ST TURN

This is the function which restricts the maximum speed of
the steering servo. You configure the direction (TURN) of the
steering movement.
Neutral
%
End point
Setting Range
TURN POS : 1 to 100% (Default: 50%)
TURN 1 : 1 to 100% (Default: 100%)
TURN 2 : 1 to 100% (Default: 100%)
Example
When the behavior of the car steering is hard to
handle, reducing the operational speed can allow the
operation of steering to become easier.
P Take into account such factors as the servo used, car, driving
surface, etc. when adjusting all settings. Conduct test drives to find
the best setting values.
Effective speed values are dependent on the speed characteristics
P
of your selected servo.
P When setting POS=100%, TURN2 cannot be set because POS is
now the entire movement range.

ST RETURN

This is the function which restricts the maximum speed of the
steering servo returning back to neutral.
You configure the direction (RETURN) of the steering
movement.
Neutral
Setting Range
RETURN POS : 1 to 100% (Default: 50%)
RETURN1 : 1 to 100% (Default: 100%)
RETURN2 : 1 to 100% (Default: 100%)
Take into account such factors as the servo used, car, driving
P
surface, etc. when adjusting all settings. Conduct test drives to find
the best setting values.
P Effective speed values are dependent on the speed characteristics
of your selected servo.
P When setting POS=100%, TURN2 cannot be set because POS is
now the entire movement range.
Elapsed Time
Full Lock
Wheel Wheel
Operation Operation
Begin Turn
Neutral
Elapsed Time
Full Lock
Servo Movement
Neutral
Different values will affect the graph's appearance
49
End point
Quick
Return
Operations
Speed
Position
Servo Speed