Twin Servo; 4Ws - Ko Propo EX-NEXT Instruction Manual

3-8CH

TWIN SERVO

This function modifies the setting for using 2 steering servo.
Using left steering servo 1ch, and right steering servo 3ch or
4ch.
Example
Ackerman control is possible when using for drift cars using
twin servos.
3CH MODE ： TWIN SERVO
LEFT −ST
（１CH）
L・LEFT 70％
L・RIGHT 70％
L・SPEED 100％
L・TRIM 0
Setting Value
LEFT-ST (1CH)
L-LEFT : 30 - 100% (Default : 70%)
Sets the highest value for the 1CH servo left operation.
L-RIGHT : 30 - 100% (Default : 70%)
Sets the highest value for the 1CH servo right operation.
L-SPEED : 1 - 100% (Default : 100%)
Sets the steering speed for the 1CH servo operation.
L-TRIM : 50 - 50 (Default : 0)
Sets the neutral position for the 1CH servo operation range.
RIGHT-ST
NORM(Normal),REVS(Reverse) (Default : NORM)
Sets operation direction of 3CH or 4CH servo.
R-LEFT : 30 - 100% (Default : 70%)
Sets the highest value for the 3(4)CH servo left operation
R-RIGHT : 30 - 100% (Default : 70%)
Sets the highest value for the 3(4)CH servo right operation.
R-SPEED : 1 - 100% (Default : 100%)
Sets the steering speed for the 3(4)CH servo operation.
R-TRIM : -50 - 50 (Default : 0)
Sets the neutral position for the 3(4)CH servo operation range.
3 ・ 4CH
RIGHT ー ST
NORM
R・LEFT 70％
R・RIGHT 70％
R・SPEED 100％
R・TRIM 0

4WS

This function is related to an R/C car's 4-wheel steering
feature. If 3CH or 4CH is assigned to control the rear axle, it
will operate in conjunction with 1CH (steering). The direction of
the rear axle steering may also be changed.
3CH MODE ： ４WS
MODE NORMAL
LEFT 70
CENTER 0
RIGHT 70
TRVL 100
REVERSE NORM
Setting Range
MODE (Default: NORMAL)
NORMAL : front and rear axles turn in the same direction
REVERSE : front and rear axles turn in opposite directions
F STEER : steer front axle only
R STEER : steer rear axle only
LEFT : 0 - 100 (Default: 70)
Adjusts the rear axle servo movement range when steering is
turned to the left.
CENTER : -50 - 50 (Default: 0)
Adjust the rear axle servo's neutral position.
RIGHT : 0 - 100 (Default: 70)
Adjusts the rear axle servo movement range when steering is
turned to the right.
TRAVEL : 0 - 150 (Default: 100)
Adjusts the overall amount of movement of the rear axle
servo when the steering is at full lock.
REVERSE : NORM,REVS (Default : NORM)
Sets operation direction of 3CH or 4CH servo.
MODE >> KEY : OFF,ET1 - 5 (Default : OFF)
Assigns ET keys to be used for 4WS Mixing MODE.
CENTER >> KEY : OFF,ET1 - 5 (Default : OFF)
Assigns ET keys to be used for 4WS Mixing CENTER.
TRVEL >> KEY : OFF,ET1 - 5 (Default : OFF)
Assigns ET keys to be used for 4WS Mixing TRAVEL.
34
3 ・ 4CH
->KEY:OFF
->KEY:OFF
->KEY:OFF