Web Remote Control - Speco H6HRN User Manual

Remote Surveillance
Click Start→Settings→Network→NAT to go to the interface for NAT configuration and check "Enable".
②
Click "Apply" to save the settings and make note of the QR code number under the QR code. Via Internet
Explorer, go to connect.specotech.cloud, input the QR code number, your username and password to login.
➢ PPPoE Access
Click Start→Settings→Network→PPPoE to go to the "PPPoE" interface. Check "Enable" in the "PPPoE
①
settings" and then enter the username and password you get from your ISP. Click "Apply" to save the
settings.
Click Start→Settings→Network→Network Status to view the IP address of the DVR.
②
Open the web browser on your computer, enter the IP address of the DVR like http://210.21.229.138 in
③
the address bar and then press enter to go to the login interface. Enter the username and password of the
DVR in the interface and then click "Login" to go to the live view interface.
➢ Router Access
Click Start→Settings→Network→TCP/IP to go to the "TCP/IP" interface. Set the IP address, subnet mask,
①
gateway, preferred DNS and alternate DNS of the DVR.
Set the HTTP port (it is suggested to modify the HTTP port because the default HTTP port 80 might be
②
taken up) and enable UPnP function in both the DVR and the router. If the UPnP function is not available in
the router, you need to forward the LAN IP address, HTTP port and server port of the DVR to the router. Port
mapping settings may be different in different routers, so please refer to the user manual of the router for
details.
Get the WAN IP address of the DVR from the router. Open the web browser on your computer, enter the
③
WAN IP address plus HTTP port like http://116.30.18.215:100 in the address bar and then press enter to go
to the login interface. Enter the username and password of the DVR in the interface and then click "Login" to
go to the live view interface.

12.4 Web Remote Control

The supported browsers for remote access are IE8/9/10/11, Firefox, Opera and Chrome (available only for
the versions lower than 45) in Windows system and Safari in MAC system. Here we take IE browser for
example. When you access the DVR through IE for the first time, you need to download and install the
relative components for normal preview and playback. Please refer to the tips in the remote interfaces for
details. The buttons and icons on the top right corner of the remote interface are introduced as follows.
admin: the current login username.
Logout: click it to log out and return to the login interface.
Note: If the WAN IP address is a dynamic IP address, it is necessary for you to use the domain name to
→
access the DVR. Click Start Settings
for details). By using DDNS function you can use the domain name plus HTTP port like
http://sunshine.dvrdydns.com:100 to access the DVR via internet.
→ →
Network DDNS to set DDNS (see 12.1.4 DDNS Configuration
79
DVR User Manual