Table of Contents
Advertisement
PTZ
Click "Cruise" to go to cruise operation tab and then click "Add" button to pop up a window as shown below
left. You can add 8 cruises for each dome at most.
Enter the cruise name in the "Add Cruise" window and then click "Add preset" to pop up the "Add Preset"
①
window (Before adding preset to the cruise, please add preset of the dome first).
In the "Add Preset" window, select the preset name, preset time and preset speed and then click "OK"
②
button.
In the "Add Cruise" window, you can click
③
speed. Click
to delete the preset. Click "Add" button to save the cruise.
Click
to start the cruise and click
click "Delete" button to delete the selected cruise.
You can also go to cruise setting interface for cruise setting, see
6.2 Preset Setting
Click Start→Settings→Camera→PTZ→Preset to go to the interface as shown below.
➢ Add preset
to reselect the preset, then change the preset time and
to stop the cruise in the cruise list of the cruise operation tab;
6.3 Cruise Setting
31
DVR User Manual
for details.
Advertisement
Table of Contents
