Table of Contents
Advertisement
Record & Disk Management
DVR User Manual
Select one auto mode to pop up the corresponding window. Set the encode, GOP, resolution, FPS, bitrate
type, quality, max bitrate and audio of each camera and then click "OK" to save the settings. Please adjust
the parameters according to the actual condition.
Video Encode: the available options will be H.265 and H.264 if the connected IP camera supports H.265, or
the option will be H.264 only.
GOP: group of pictures.
Resolution: the higher the resolution is, the clearer the image is.
FPS: the higher the frame rate is, the more fluency the video is. However, more storage room will be taken
up.
Bitrate Type: CBR and VBR are optional. CBR means that no matter how much change is seen in the video
scene, the compression bitrate will be kept constant. VBR means that the compression bitrate will be
adjusted according scene changes. For example, for scenes that do not have much movement, the bitrate
will be kept at a lower value. This will help to optimize the network bandwidth.
Quality: When VBR is selected, you need to choose image quality. The higher the image quality you choose,
the more bitrate will be required.
Max Bitrate: 32Kbps ~10240Kbps are optional.
➢ Manual Mode
If the manual mode is selected, you need to set the encode parameters and record schedules of each
camera. See
and
for details.
7.2 Encode Parameters Setting
7.3 Schedule Setting
7.1.2 Advanced Configuration
Click Start→Settings→Record→Advanced to go to the following interface. Enable or disable "Overwrite
record" (Overwrite record: the earliest recorded data will be replaced by the latest when the disks are full).
35
Advertisement
Table of Contents
