Table of Contents
Advertisement
Alarm Management
8.1 Instant Playback
Click
on the tool bar at the bottom of the preview camera window to play back the recorded video
(click
on the tool bar at the bottom of the live view interface to set the default playback time). Refer to
the picture below. Drag the playback progress bar to change the playback time. You can also click the right-
click menu "Instant Playback" in the camera window and then set the instant playback time to play back the
record.
8.2 Playback Interface Introduction
Click
on the tool bar at the bottom of the live view interface or click Start→Playback to go to the
playback interface as shown below (click
the default playback time).
On the panel on the right you will see the channel number and the recorded data coded by color. The bar
that runs across them represents the playback time being viewed. You can move this bar around to export,
highlight a section of the desired recording, click export and follow the prompts. You can export single or
multiple channels at the same time.
The added cameras will playback their records in the playback interface automatically. You can also add the
playback camera manually. Click
8 Playback& Backup
on the tool bar at the bottom of the live view interface to set
in the playback window to pop up the "Add Camera" window. Check the
43
DVR User Manual
Advertisement
Table of Contents
