EZ Setup & Main Interface
Scheduled: Set the "Sensor Record", "Motion Record" and "Schedule Record" of each camera. Click "OK" to
save. See
7.1.1 Mode Configuration
QR Code. Enable the NAT function in the interface or set it in the network configuration after exiting the
⑦
wizard (please refer to
App available for iOS and Android to easily and securely view your cameras. Please refer to
for details. Click "OK" to save the settings.
Surveillance
3.2 Main Interface
3.2.1 Main Interface Introduction
for details.
for details). You can scan the QR Code through the Speco Blue
11.1.8 NAT Configuration
11
DVR User Manual
12.1 Mobile Client