Record & Disk Management
DVR User Manual
Set the pre-alarm record time, post-alarm record time and expiration time of each camera and then click
"Apply" to save the settings.
Pre-alarm Record Time: set the time to record before the actual recording begins.
Post-alarm Record Time: set the time to record after the actual recording is finished.
Expiration Time: set the expiration time for recorded video. If the set date is overdue, the recorded data will
be deleted automatically.
7.2 Encode Parameters Setting
Click Start→Settings→Record→Encode Parameters to go to the interface as shown below. Set the encode,
resolution, FPS, GOP, bitrate type, quality, max bitrate and audio of main stream for each camera in "Event
Recording Settings" and "Schedule Recording Settings" interfaces. Click "Apply" to save the settings. You can
set the record stream of each camera one by one or batch set them for all cameras.
Click Start→Settings→Record→Stream Settings to go to "Sub-stream" interface. Set the encode, resolution,
FPS, GOP, bitrate type, quality and max bitrate of sub-stream for each camera in the interface and then click
"Apply" to save the settings.
36