Table of Contents
Advertisement
Alarm Management
Introduction of area ④:
You can check the record type as required for record playback; first you should click
the bottom of the interface to clear all the playback camera, then check the record type (
: sensor based record;
click
in the playback window to add camera for playback (the record time scale will show the record
data of the checked record type only after the above operations).
Introduction of the record time scale (area ⑤):
Click
to set the date; click
the time you set.
A tool bar will appear after moving the mouse to the record time scale. Click
timeline; click
the mouse on the time scale to show the hidden time on the top or bottom of the timeline. You can also
click
to show the hidden time on the top of the timeline or click
bottom of the timeline. Drag the slider at the bottom of the time scale to show the hidden playback
cameras.
The record time scale shows different record types with different colors. The green block stands for manual
record, red block stands for sensor based record, yellow block stands for motion based record, blue block
stands for schedule record and cyan block stands for intelligence record. Click the record block to set the
time and then the playback camera will play the record from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or click
pop up an export information window. Click
the device, export path and format and then click "Export" button to start the backup.
8.3 Smart Playback
⚫ Smart Playback Settings
Click
to go to the following interface. Set the value of "Speed of non-interest video" (Please skip this one
if you click "Skip non-interest video"), "Speed of interest video" and "Intrusion percentage".
Button
Menu List
--
Enable Audio
Snapshot
Zoom In
Add Tag
Switch Camera
Close Camera
: motion based record;
to set the time and then the playback camera will play the record from
to recover the timeline to 24 hours' ratio. Drag the timeline or slide the scroll wheel of
Meaning
Move tool. Click it to move the tool bar anywhere.
Click it to enable audio. You can listen to the camera audio by
enabling audio.
Click it to snap.
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live view interface.
Click
to pause the record playing; click
record. When the record is paused in forward playing mode, you
can click
to view the previous frame and click
view the next frame.
Click it to add tag. You can play back the record by searching the
added tag. Click it and then enter the tag name in the popup
window. Click "Add" to add tag.
Click it to switch the playback camera. Click it and then check the
camera in the popup window. Click "OK" to change the camera.
Click it to close the playback camera.
: schedule record;
button in the window to pop up the export window. Select
45
DVR User Manual
to play the
to
on the tool bar at
: manual record;
: analytics record; and finally
/
to zoom the
to show the hidden time on the
to
Advertisement
Table of Contents
