Record & Disk Management
DVR User Manual
➢ Set Week Schedule
Click
or
and then click "Manual" beside
to set the week schedule. Refer to the picture below. Set the start and end time, check
the days in the window and then click "OK" to save the settings.
Click "All" to set all week recording; click "Reverse" to swap the selected and unselected time in a week; click "Clear All" to clear all the selected
area in a week.
7.3.2 Record Schedule Configuration
Click Start→Settings→Record→Record Schedule→Schedule Configuration to go to the interface as shown
below. Set the schedule of sensor record, motion record, timed record and intelligence record. Click "None"
in the drop-down menu to clear the schedule. Click "Apply" to save the settings.
Go to "Edit Schedules" interface and then click
to edit the schedule. The settings of "Edit Schedule" are
similar to that of the "Add Schedule". Click
to delete the schedule.
39