Table of Contents
Advertisement
Device Management
11.1.3 PPPoE Configuration
Click Start→Settings→Network→PPPoE to go to the interface as shown below. Check "Enable" in "PPPoE Settings" and then enter the username
and password obtained from the dealer. Click "Apply" to save the settings.
11.1.4 DDNS Configuration
The DDNS is used to control the dynamic IP address through domain name. Speco Technologies provides free
DDNS service with US-based servers. You can access the DVR easily if the DDNS is enabled and configured. Click
Start→Settings→Network→DDNS to go to the interface as shown below. The default DDNS type will be
"specoddns.net". The default domain name will be shown. You can use this for your domain name or enter your
own. If invalid or taken, please select another domain name. Click on test to check if ok. If so, you may now go
to [your domain name].specoddns.net with Internet Explorer and access your recorder remotely.
11.1.5 E-mail Configuration
Click Start→Settings→Network→E-mail to go to the following interface. Enter the sender's name, e-mail
address, SMTP server and SMTP port (you can click "Default" to reset the SMTP port to the default value)
and then enable or disable the SSL and attaching image. Select the username (the username list will be
updated automatically according to the email address you input) and enter the password of the sender and
then click "Apply" to save the settings (you don't have to enter the username and password if "Anonymous
Login" is enabled). Click "Test" to pop up a window. Enter the e-mail address of the recipient in the window
and then click "OK" button. The e-mail address of the sender will send an e-mail to the recipient. If the e-
mail is sent successfully, it indicates that the e-mail address of the sender is configured correctly.
70
DVR User Manual
Advertisement
Table of Contents
