Device Management
11.1.7 802.1X
If it is enabled, the DVR data can be protected. When the DVR is connected to the network protected by the
IEEE 802.1X, user authentication is needed.
To use this function, the DVR shall be connected to a switch supporting 802.1x protocol. The switch can be
considered as an authentication system to identify the device in a local network. If the DVR connected to the
network interface of the switch has passed the authentication of the switch, it can be accessed via the local
network.
Protocol type and EAPOL version: Please use the default settings.
User name and password: The user name and password must be the same with the user name and password
applied for and registered in the authentication server.
11.1.8 NAT Configuration
Click Start→Settings→Network→NAT to go to the interface for NAT configuration and check "Enable". Click
"Apply" to save the settings and make note of the QR code number under the QR code. Via Internet
Explorer, go to connect.specotech.cloud, input the QR code number, your username and password to login.
You can also scan the QR Code through the Speco Blue app on your mobile client phone or tablet to log into
the recorder instantly.
72
DVR User Manual